Products

Handheld & field instruments

Isotope identification, dose-rate and contamination measurement for the field and first response.

185 products

New

BrightSpec

Flint USB

Integrated gamma probe: SiPM scintillation detector and digital MCA in one housing

Detector type: Scintillator with SiPM; standard round NaI(Tl), 2 × 2 or 3 × 3 in; can be ordered with CsI(Tl), CeBr₃, LaBr₃(Ce), LBC or SrI₂
Spectrum channels: 256, 512, 1,024, 2,048 or 4,096, 32-bit depth per channel

13 referenced values

Bertin

SaphyRAD S

Dose rate & contamination

Energy range: 50 keV–3 MeV
IP rating: IP65
Weight: 620 g

13 referenced values

ELSE NUCLEAR

FOOMON

Food monitoring

Detector type: 2 × 2 inch NaI(Tl)
Total weight: Approximately 22 kg
IP rating: IP67 during transport with closed lid; IP65 in operating setup

12 referenced values

Ludlum

Model 26 Friskers

Contamination monitoring

Detector type: Integrated pancake GM
Energy range: 16.3 keV–1.3 MeV
Count-rate range: 0.1 cps–1.99 kcps; 1 cpm–99.9 kcpm

12 referenced values

H3D

H Series

Gamma imaging

Detector type: CZT (CdZnTe)
Spectroscopy energy range: 50–3000 keV (H100/H400/H420/H1600)
IP rating: H100/H400/H420/H1600: IP67 (excluding external media)

9 models

ORTEC

Detective DX1

Portable HPGe spectroscopy

Detector type: P-type coaxial HPGe detector
Energy range: DX1/DX1-N: 40 keV–3 MeV; DX1-8/DX1-8-N: 40 keV–8 MeV
Weight: 7.23 kg gamma; 7.87 kg gamma/neutron

4 models

ORTEC

RADEAGLET-R

Handheld isotope identification

Detector type: NaI(Tl) or LaBr₃(Ce), model dependent
Energy range, NaI: NaI: 15 keV–3 MeV
Spectrum channels: 2,048

12 models

Bertin · Bertin VF Nuclear

PAM-100 / PAM-170

Portable activity meters

Detector type: Plastic scintillator and/or ZnS(Ag), variant dependent
Active area: PAM-100: 100 cm²; PAM-170: 170 cm²

20 models

H3D

A Series (A400) RIID

Handheld RIID

Detector type: A400: CZT (CdZnTe)
Spectroscopy energy range: A400: 50–3000 keV
Weight: A400: 1.2 kg

6 models

ORTEC

RADEAGLE

Handheld isotope identification

Detector type: NaI(Tl) or LaBr₃(Ce), model dependent
Energy range: 11 keV–3 MeV
Spectrum channels: 2,048

20 models

Rotem

Emergency Response Kit 2

Emergency response case with a RAM R-200 and external probes

Kit contents: Plastic suitcase with a RAM R-200, RG-10 or RG-12, RG-40, PA-100, short telescopic pole, cables meter–detector, meter–PC and detector–PC, batteries and booklet

1 referenced value

Rotem

Emergency Response Kit 1

Emergency response case with a RAM R-200 and external probes

Kit contents: Plastic suitcase with a RAM R-200, one probe (RG-10, RG-12 or RG-40), cables meter–detector, meter–PC and detector–PC, batteries and booklet

1 referenced value

Rotem

PM-33 Detector

Highly sensitive 3 × 3 inch NaI(Tl) probe for environmental gamma monitoring

Energy range: Gamma above 50 keV
Measurement range: Stand-alone: background to 10 µSv/h; as environmental monitor with the TeleMeter: background to 15 mSv/h
Count-rate range: 0–50,000 cps

9 referenced values

Rotem

PM-11 Detector

Sensitive NaI(Tl) gamma probe, Rotem’s primary effluent detector in WebiSmarts

Detector: NaI(Tl), 5.1 × 5.1 cm (2 × 2 in); magnetically shielded 5.1 cm photomultiplier
Energy range: Gamma above 50 keV; recommended 30 keV – 3.0 MeV
Count-rate range: 0–50,000 cps

8 referenced values

Rotem

PM-10 Detector

Thin NaI(Tl) probe for low-energy gamma and X-rays, optimised for I-125

Detector: NaI(Tl), 2 in diameter × 0.04 in; 1 mil (0.001 in) aluminium window
Energy range: Low-energy gamma, 10–80 keV
Count-rate range: 0–50,000 cps

8 referenced values

Rotem

RP-11 Detector

Highly sensitive NaI(Tl) gamma probe for the RAM R-200 or stand-alone

Detector: NaI(Tl), 2 × 2 in, hermetically sealed, with a 2-inch photomultiplier
Energy range: Gamma above 50 keV
Count-rate range: 0–50,000 cps

9 referenced values

Rotem

PA-100 Detector

Air proportional alpha detector with a 100 cm² sensitive area

Detector: Air proportional alpha detector
Weight: 1 kg

9 referenced values

Rotem

IC-10 Detector

Rugged ion chamber detector for gamma, X-ray and beta radiation

Detector: Ion chamber, 500 cc; wall and cover 300 mg/cm² (tissue equivalent); end window 7 mg/cm²
Measurement range: 1 µSv/h – 250 mSv/h (0.1 mR/h – 25 R/h)
Weight: 470 g

10 referenced values

Rotem

GM-10 Detector

Pancake GM probe for alpha, beta and gamma surface contamination

Detector: Pancake GM tube LND 73118 or equivalent; mica window 1.5–2.0 mg/cm² behind a fine stainless-steel wire mesh
Count-rate range: 0–42,000 cps
Weight: 370 g (0.8 lb)

8 referenced values

Rotem

Neutron Area Monitor

Wall-mounted neutron detector (Ludlum 42-30H) for area monitoring in WebiSmarts

Detector: Proportional neutron detector Ludlum Model 42-30H; moderator: polyethylene sphere ø25.4 cm
Energy range: Thermal to approx. 12 MeV
Weight: 8.8 kg (19.5 lb)

11 referenced values

Rotem

RG-40 Detector

GM probe for high gamma fields, up to 100 Sv/h, for the RAM R-200

Detector: GM tube 4G60M
Measurement range: 1 mSv/h – 100 Sv/h (0.1–10,000 R/h)
Weight: 130 g (0.3 lb)

9 referenced values

Rotem

RG-12 Detector

Small pancake GM probe for alpha, beta, gamma and X-ray contamination, for the RAM R-200

Detector: GM tube LND 7231
Measurement range: 0–1.00 Mcpm
Weight: 280 g (0.6 lb)

11 referenced values

Rotem

RG-10 Detector

Pancake GM probe for alpha, beta, gamma and X-ray contamination, for the RAM R-200

Detector: Pancake GM tube NRC 2006
Measurement range: 0–1.00 Mcpm
Weight: 310 g (0.7 lb)

11 referenced values

Rotem

RAM DA3-2000 Meter

Smart meter for a range of interchangeable external detectors, with internal GM detector

Detector: Internal detector (DA3-2000): two energy-compensated GM tubes, ZP1201 and ZP1313 (air kerma) or ZP1202 and ZP1314 (H*(10)); DA 2000 without internal detector
Measurement range: 0.5 µSv/h – 1 Sv/h (50 µR/h – 100 R/h), internal detector
Weight: 1.5 kg including batteries and internal detectors

14 referenced values

Showing 24 of 185