Bild: Rotem
Sensitive NaI(Tl) gamma probe, Rotem’s primary effluent detector in WebiSmarts
Gamma scintillation probe with a hermetically sealed 2 × 2 inch NaI(Tl) crystal and photomultiplier. It is Rotem’s primary, highly sensitive effluent detector in WebiSmarts and is mounted in the exhaust stack of cyclotrons to provide online release data; it can also be connected to the coincidence box, DRM-3000, DPU-3, RAM DA 2000 and RAM R-200.
Download product sheet (PDF)All values with references – for tender documents
Specifications checked against the manufacturer’s documents on 2026-10-17
The number after each value refers to the source listed below. Values are as published by the manufacturer; the exact configuration is always confirmed in our quotation.
| Detector | NaI(Tl), 5.1 × 5.1 cm (2 × 2 in); magnetically shielded 5.1 cm photomultiplier1 |
|---|---|
| Energy range | Gamma above 50 keV; recommended 30 keV – 3.0 MeV1 |
| Detection efficiency | ¹²⁵I 4%; ⁵⁷Co 20%; ¹³⁷Cs 9%; ⁶⁰Co 15%1 |
| Count-rate range | 0–50,000 cps1 |
| Compatible meters | Coincidence box (WebiSmarts), DRM-3000, DPU-3, RAM DA 2000 and RAM R-200 (as RP-11)1 |
| Dimensions | 340 mm long, ø70 mm1 |
| Operating temperature | −10 to +50 °C1 |
| Weight | 1.75 kg1 |
The data comes from the manufacturer’s published documents. Manufacturers may change specifications; the current configuration and performance are confirmed in the quotation.
The number after each value refers to the source listed below. Values are as published by the manufacturer; the exact configuration is always confirmed in our quotation.
Two-detector coincidence system for very low emissions in the exhaust stack
Web-based area and stack monitoring system with DPU-3 monitors
Smart meter for a range of interchangeable external detectors, with internal GM detector
Sensitive low-range GM gamma detector for clean rooms and radiopharmacies
We help you choose the right configuration, detector and accessories for your measurement task.
Rotem Industries