Bertin
SaphyRAD S
Dose rate & contamination
- Energy range
- 50 keV–3 MeV
- IP rating
- IP65
- Weight
- 620 g
13 referenced values
Products
Product catalogue
Search and filter detectors, measurement instruments, electronics and software. Every technical value is taken from the manufacturers’ own documents and referenced to its source.
Not sure what you need? Try the instrument finderProducts
H3D
H Series
Gamma imaging
- Detector type
- CZT (CdZnTe)
- Spectroscopy energy range
- 50–3000 keV (H100/H400/H420/H1600)
- IP rating
- H100/H400/H420/H1600: IP67 (excluding external media)
9 models
ORTEC
Detective DX1
Portable HPGe spectroscopy
- Detector type
- P-type coaxial HPGe detector
- Energy range
- DX1/DX1-N: 40 keV–3 MeV; DX1-8/DX1-8-N: 40 keV–8 MeV
- Weight
- 7.23 kg gamma; 7.87 kg gamma/neutron
4 models
ORTEC
RADEAGLET-R
Handheld isotope identification
- Detector type
- NaI(Tl) or LaBr₃(Ce), model dependent
- Energy range, NaI
- NaI: 15 keV–3 MeV
- Spectrum channels
- 2,048
12 models
H3D
A Series (A400) RIID
Handheld RIID
- Detector type
- A400: CZT (CdZnTe)
- Spectroscopy energy range
- A400: 50–3000 keV
- Weight
- A400: 1.2 kg
6 models
ORTEC
RADEAGLE
Handheld isotope identification
- Detector type
- NaI(Tl) or LaBr₃(Ce), model dependent
- Energy range
- 11 keV–3 MeV
- Spectrum channels
- 2,048
20 models
Rotem
POE Ethernet Switch
PoE network switch (Cisco Catalyst 3560-CX, 8 ports) for WebiSmarts
- Weight
- 2.26 kg
6 referenced values
Rotem
Advanced Detector Bracket
Detector bracket with LEDs and buzzer for local feedback far from the DPU-3
- Weight
- 0.32 kg
4 referenced values
Rotem
External Signal Interface
Ethernet relay board for controlling external devices from WebiSmarts
- Relay outputs
- 8 relay channels 250 V AC/10 A, individually controlled; 8 external control outputs (active low)
- Communication
- Ethernet TCP/IP (RJ45) with on-board web server; RS-485 networking
- Supply voltage
- 7–24 V DC
3 referenced values
Rotem
External Light Tower
Light tower showing the highest radiation level from the detectors on a DPU-3
- IP rating
- IP65 (IEC 60529), NEMA type 4X and 13
5 referenced values
Rotem
Main Control Workstation
Workstation for WebiSmarts, with minimum requirements for a local or virtual machine
- System components
- ThinkStation P360 Ultra: 32 GB RAM, 1 TB hard drive, 7 USB ports including 2 Thunderbolt 4
- Minimum requirements for WebiSmarts
- Local machine: i9-13900K (24 cores), Windows 11 Pro or Windows Server 2022, 32 GB DDR5, 1 TB SSD; virtual machine: 12 vCPUs, 32 GB, 1 TB
- Firewall ports
- 5000, 8080 and 15386
3 referenced values
Rotem
Emergency Response Kit 2
Emergency response case with a RAM R-200 and external probes
- Kit contents
- Plastic suitcase with a RAM R-200, RG-10 or RG-12, RG-40, PA-100, short telescopic pole, cables meter–detector, meter–PC and detector–PC, batteries and booklet
1 referenced value
Rotem
Emergency Response Kit 1
Emergency response case with a RAM R-200 and external probes
- Kit contents
- Plastic suitcase with a RAM R-200, one probe (RG-10, RG-12 or RG-40), cables meter–detector, meter–PC and detector–PC, batteries and booklet
1 referenced value
Rotem
PM-11 Detector
Sensitive NaI(Tl) gamma probe, Rotem’s primary effluent detector in WebiSmarts
- Detector
- NaI(Tl), 5.1 × 5.1 cm (2 × 2 in); magnetically shielded 5.1 cm photomultiplier
- Energy range
- Gamma above 50 keV; recommended 30 keV – 3.0 MeV
- Count-rate range
- 0–50,000 cps
8 referenced values
Rotem
Neutron Area Monitor
Wall-mounted neutron detector (Ludlum 42-30H) for area monitoring in WebiSmarts
- Detector
- Proportional neutron detector Ludlum Model 42-30H; moderator: polyethylene sphere ø25.4 cm
- Energy range
- Thermal to approx. 12 MeV
- Weight
- 8.8 kg (19.5 lb)
11 referenced values
Rotem
GM-42 Detector
Sensitive low-range GM gamma detector for clean rooms and radiopharmacies
- Detector
- GM tube ZP-1201 or equivalent
- Measurement range
- 0.5 µSv/h – 10 mSv/h (50 µR/h – 1 R/h)
- Energy range
- 50 keV – 1.3 MeV
9 referenced values
Rotem
GM-41 Detector
GM gamma detector for high fields, e.g. in cyclotron bunkers and hot cells
- Detector
- GM tube ZP-1313 or equivalent
- Measurement range
- 50 µSv/h – 1 Sv/h (5 mR/h – 100 R/h)
- Energy range
- 50 keV – 1.3 MeV
10 referenced values
Rotem
GM-40 Detector
GM gamma detector for very high fields, 250 µSv/h – 10 Sv/h
- Detector
- GM tube ZP1301
- Measurement range
- 250 µSv/h – 10 Sv/h (25 mR/h – 1,000 R/h)
- Energy range
- 50 keV – 1.3 MeV
8 referenced values
Rotem
Wide Range External Gamma Beta Detector
Smart wide-range gamma and beta detector for WebiSmarts, 0.5 µSv/h – 10 Sv/h
- Detector
- GM tubes ZP-1301 and ZP-1400 (or equivalent)
- Measurement range
- 0.5 µSv/h – 10 Sv/h (50 µR/h – 1,000 R/h)
- Energy range
- Gamma 50 keV – 2 MeV
11 referenced values
Rotem
Wide Range External Gamma Detector
Smart wide-range gamma detector for WebiSmarts, 0.5 µSv/h – 10 Sv/h
- Detector
- GM tubes ZP-1301 and ZP-1201 (or equivalent)
- Measurement range
- 0.5 µSv/h – 10 Sv/h (50 µR/h – 1,000 R/h)
- Energy range
- Gamma 50 keV – 2 MeV
11 referenced values
Rotem
EnviSmarts
Indoor and outdoor environmental monitoring with stand-alone monitors and online software
- Measurement range
- PM-33 monitor: background to 15 mSv/h (1.5 R/h), the detector up to 10 µSv/h and then the TeleMeter’s GM tube; RP-33 monitor: background to 1 Sv/h (100 R/h) with the RAM R-200’s GM tubes from 10 µSv/h
3 referenced values
Rotem
Coincidence Exhaust Stack Monitoring
Two-detector coincidence system for very low emissions in the exhaust stack
- Detector
- PM-11M gamma detector (NaI(Tl), 2 × 2 in), beta detector (plastic scintillator for positron identification) and GM-42 high-range GM detector; plus a flow meter
2 referenced values
Rotem
WebiMissions Software
Software for collecting and reporting effluent emissions with existing detectors
- Primary function
- Collecting, storing, displaying and reporting effluent emissions with existing detectors (derived from WebiSmarts)
- Functions
- With the PM-11 coincidence system: reports only effluent within the exhaust duct; identifies F-18, Ga-68, O-15, C-11, N-13, I-131, Tc-99m, Ga-67, Tl-201, I-125 and Lu-177
2 referenced values
Rotem
WebiSmarts System
Web-based area and stack monitoring system with DPU-3 monitors
- Primary function
- Web software that receives online data from DPU-3 area monitors and shows them on colour-coded maps
- Functions
- One year of history per point; isotope identification of effluent; over 20 maps; real-time background subtraction; dose and dose rate at the same time
- System components
- Web software, DPU-3 monitors (four detectors each) and a stack monitor; maps, points and history are stored on a server and accessed with a browser
4 referenced values
Showing 24 of 210