
GM-40 Detector
GM gamma detector for very high fields, 250 µSv/h – 10 Sv/h
- Detector
- GM tube ZP1301
- Measurement range
- 250 µSv/h – 10 Sv/h (25 mR/h – 1,000 R/h)
- Energy range
- 50 keV – 1.3 MeV

Bild: Rotem
Sensitive low-range GM gamma detector for clean rooms and radiopharmacies
Sensitive low-range gamma detector for measuring dose rates where radioactive material is handled, such as clean rooms, radiopharmacies, QA departments and packing rooms, and as a backup to the extremely sensitive PM-11 exhaust stack detector. Like all WebiSmarts detectors it contains its calibration factor and a unique electronic identifier.
Download product sheet (PDF)All values with references – for tender documents
Specifications checked against the manufacturer’s documents on 2026-10-17
The number after each value refers to the source listed below. Values are as published by the manufacturer; the exact configuration is always confirmed in our quotation.
| Detector | GM tube ZP-1201 or equivalent1 |
|---|
| Measurement range | 0.5 µSv/h – 10 mSv/h (50 µR/h – 1 R/h)1 |
|---|---|
| Energy range | 50 keV – 1.3 MeV1 |
| Energy response | ±20%1 |
| Angular dependence | Less than ±20% within ±45° of the preferred direction1 |
| Signal outputs | TTL pulses (5 V, 5 ms); status: identification, malfunction, overflow; cable up to 100 m2 |
|---|
| Operating temperature | −10 to +50 °C1 |
|---|
The data comes from the manufacturer’s published documents. Manufacturers may change specifications; the current configuration and performance are confirmed in the quotation.
The number after each value refers to the source listed below. Values are as published by the manufacturer; the exact configuration is always confirmed in our quotation.

GM gamma detector for very high fields, 250 µSv/h – 10 Sv/h

GM gamma detector for high fields, e.g. in cyclotron bunkers and hot cells

Sensitive NaI(Tl) gamma probe, Rotem’s primary effluent detector in WebiSmarts

Ethernet area monitor with PoE for WebiSmarts, with or without an internal detector
We help you choose the right configuration, detector and accessories for your measurement task.