ORTEC F Series

Partially depleted silicon surface-barrier detectors for heavy ions

Partially depleted silicon surface-barrier detectors for heavy-ion spectroscopy, with active areas from 100 to 900 mm² and depletion depths of at least 60 µm. Standard detectors are cut off-axis from the parent crystal to minimise channelling and are supplied in B mount unless specified otherwise.

Detector type: Partially depleted silicon surface barrier1
Active area: 100, 300, 400, 600 or 900 mm²1
Depletion depth: ≥60 µm, partially depleted; greater depths on special order1

Download product sheet (PDF)All values with references – for tender documents

Specifications checked against the manufacturer’s documents on 2026-10-17

Manufacturer’s product page (opens in a new tab)

Overview

Nuclear power & nuclear technology Research & laboratories Environmental monitoring & radiation protection

Specifications

The number after each value refers to the source listed below. Values are as published by the manufacturer; the exact configuration is always confirmed in our quotation.

Detector

Detector type	Partially depleted silicon surface barrier1
Active area	100, 300, 400, 600 or 900 mm²1
Depletion depth	≥60 µm, partially depleted; greater depths on special order1
Alpha Suite compatibility	Not guaranteed compatible; requires an approved special for compatibility and warranted specifications1

Performance

Maximum noise	18 keV (100 mm²), 23 keV (300 mm²), 28 keV (400 mm²), 33 keV (600 mm²), 35 keV (900 mm²)1

Mechanical

Mounts	A (ring mount without connectors, special request), B (rear Microdot connector), C (rear BNC connector); supplied in B mount unless specified1

Ordering & accessories

Models	F-018-100-60, F-023-300-60, F-028-400-60, F-033-600-60, F-035-900-601

General

Main application	Heavy-ion spectroscopy1
Maximum field strength	≥15 kV/cm1

The data comes from the manufacturer’s published documents. Manufacturers may change specifications; the current configuration and performance are confirmed in the quotation.

Documents

PDFF Series brochureBrochure · ORTEC

Sources

The number after each value refers to the source listed below. Values are as published by the manufacturer; the exact configuration is always confirmed in our quotation.

1
F Series Partially Depleted Silicon Surface Barrier Radiation Detector
Publisher: ORTEC (AMETEK)Product page Page title; Main Application; Ordering Information; Ordering Information – note † … Checked 2026-10-16

ORTEC

ORTEC D Series

Totally depleted silicon surface-barrier detectors for time-of-flight

Detector type: Planar, totally depleted silicon surface barrier
Active area: 10, 50, 150, 300 or 450 mm² (10 mm² only at 15 µm depth); larger areas on special order
Depletion depth: Nominal 15, 25, 40, 50, 75 or 100 µm (ranges 7–15, 15.1–25, 25.1–40, 40.1–65, 65.1–85 and 85.1–110 µm)

9 referenced values