Bild: AMETEK SI
Bipotentiostat
Two synchronized potentiostats in one compact instrument for rotating ring-disk electrodes and catalyst studies.
Download product sheet (PDF)All values with references – for tender documents
Specifications checked against the manufacturer’s documents on 2026-10-16
The number after each value refers to the source listed below. Values are as published by the manufacturer; the exact configuration is always confirmed in our quotation.
| Polarization voltage | Channel 1: ±10 V; channel 2: ±30 V2 |
|---|---|
| EIS frequency range | Channel 1: 10 µHz–1 MHz; channel 2: 10 µHz–7 MHz; included2 |
| Minimum current range, standard | 4 nA on both channels2 |
| Measurement channels | 2 independent potentiostats1 |
|---|---|
| Maximum output current | Channel 1: 2 A; channel 2: 1 A2 |
| Software | VersaStudio included1 |
|---|
| Cell connections | 6-wire capability on channel 2; unavailable on channel 12 |
|---|
| Compliance voltage | Channel 1: ±12 V; channel 2: ±30 V2 |
|---|
| Low-current option | VersaSTAT-LC on channel 1: 4 pA range2 |
|---|
| Maximum data acquisition rate | Channel 1: 500 kS/s; channel 2: 1 MS/s2 |
|---|---|
| Floating measurement / isolation | Both channels: floating or grounded2 |
| Synchronization | Hardware-synchronized start in bipotentiostat mode2 |
The data comes from the manufacturer’s published documents. Manufacturers may change specifications; the current configuration and performance are confirmed in the quotation.
The number after each value refers to the source listed below. Values are as published by the manufacturer; the exact configuration is always confirmed in our quotation.
Materials test system
Configurable electrochemical system
Multichannel electrochemical system
Modular multichannel system
We help you choose the right configuration, detector and accessories for your measurement task.
AMETEK Scientific Instruments