Bild: AMETEK SI
Multichannel electrochemical system
Multichannel potentiostat system with a compact three-slot chassis for parallel electrochemical measurements.
Download product sheet (PDF)All values with references – for tender documents
Specifications checked against the manufacturer’s documents on 2026-10-16
The number after each value refers to the source listed below. Values are as published by the manufacturer; the exact configuration is always confirmed in our quotation.
| Polarization voltage | ±10 V1 |
|---|---|
| EIS frequency range | 10 µHz–1 MHz on main channel and Aux-1 / Aux-21 |
| Measurement channels | 1 per PMC-1000-AT module; up to 3 without booster slots1 |
|---|---|
| Maximum output current | ±2 A per PMC-1000-AT module1 |
| Auxiliary inputs | 2 differential, synchronized DC/EIS inputs; thermistor input1 |
| Software | Aspire1 |
|---|
| Compliance voltage | ±12 V1 |
|---|
| External current booster | ±10 A per booster; ±20 A uses 2 chassis slots1 |
|---|
| Chassis slots | 3, Ethernet chassis1 |
|---|---|
| Maximum data acquisition rate | 1 MS/s on main and auxiliary inputs1 |
The data comes from the manufacturer’s published documents. Manufacturers may change specifications; the current configuration and performance are confirmed in the quotation.
1 model in the series. Filter or scroll the table to compare.
| Model | Measurement channels per card1 | Host system1 | Maximum current without booster1 | Polarization voltage1 | Compliance voltage1 | Best voltage resolution1 | Best current resolution without LCI1 | Maximum acquisition rate1 | EIS frequency range2 | Software1 | Floating measurement3 | LCI resolution with option1 | Auxiliary channels1 | Data storage1 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PMC-1000-AT | 1 | PARSTAT MC-AT, 3 slots | ±2 A | ±10 V | ±12 V | 24-bit; 150 nV | 24-bit; 30 fA | 1 MS/s | 10 µHz–1 MHz | Aspire | Isolated and floating | 122 aA with the LCI low-current interface (option) | 2 differential channels, DC/EIS | Direct to disk, autonomous |
The number after each value refers to the source listed below. Values are as published by the manufacturer; the exact configuration is always confirmed in our quotation.
Materials test system
Configurable electrochemical system
Modular multichannel system
System chassis
We help you choose the right configuration, detector and accessories for your measurement task.
AMETEK Scientific Instruments