ORTEC (AMETEK)
ORTEC
RADEAGLET-R
Handheld isotope identification
- Detector type
- NaI(Tl) or LaBr₃(Ce), model dependent
- Energy range, NaI
- NaI: 15 keV–3 MeV
- Spectrum channels
- 2,048
12 models
Bild: ORTEC
INNOPROBE
Alpha/beta probe for the RADEAGLET-R
Handheld scintillation probe that extends the RADEAGLET-R to alpha and beta surface contamination measurements. It connects by USB, is powered by the instrument and can be attached or detached during operation; pulse shape discrimination separates alpha from beta.
- Detector type
- Alpha/beta-sensitive scintillator with photomultiplier (ZnS:Ag)1
- Count-rate range
- Up to 25 kcps alpha and 20 kcps beta1
- Weight
- 300 g (0.66 lb)1
Download product sheet (PDF)All values with references – for tender documents
Specifications checked against the manufacturer’s documents on 2026-10-17
Overview
Key features
- Hot-swappable and auto-calibrated
- Waterproof connector and spiral cable
- Front cap protects the detector face during transport
Specifications
The number after each value refers to the source listed below. Values are as published by the manufacturer; the exact configuration is always confirmed in our quotation.
Detector
| Radiation type | Alpha and beta1 |
|---|---|
| Detector type | Alpha/beta-sensitive scintillator with photomultiplier (ZnS:Ag)1 |
| Window | Mylar foil with honeycomb protective grid1 |
| Alpha/beta separation | Pulse shape discrimination (PSD) in a multichannel analyser with 4096 energy channels × 4096 width channels, a non-linear parametric window and Haykin adaptive optimisation1 |
Measuring range
| Count-rate range | Up to 25 kcps alpha and 20 kcps beta1 |
|---|
Connectivity & interface
| Communication | List mode; USB interrupt-mode transfer1 |
|---|
Power & battery
| Power supply | 5 V, USB-powered by the RADEAGLET-R1 |
|---|
Mechanical
| Detector dimensions | ø50 mm (2.0 in)1 |
|---|---|
| Weight | 300 g (0.66 lb)1 |
| Dimensions | 169 × 68 mm (6.7 × 2.7 in); handle ø50 mm (2.0 in)1 |
Environment & ratings
| Operating temperature | −30 °C to +70 °C1 |
|---|---|
| Operating time | 8 hours for the RADEAGLET-R with the probe connected1 |
Ordering & accessories
| Part number | RTR-IP-2AB1 |
|---|
General
| Processor | High-performance, low-power FPGA subsystem coupled to a DSP1 |
|---|---|
| Compatibility | RADEAGLET-R; can be attached or detached during operation and is auto-calibrated1 |
The data comes from the manufacturer’s published documents. Manufacturers may change specifications; the current configuration and performance are confirmed in the quotation.
Documents
Sources
The number after each value refers to the source listed below. Values are as published by the manufacturer; the exact configuration is always confirmed in our quotation.
- 1
Related products
Rotem
PA-100 Detector
Air proportional alpha detector with a 100 cm² sensitive area
- Detector
- Air proportional alpha detector
- Weight
- 1 kg
9 referenced values
Rotem
GM-10 Detector
Pancake GM probe for alpha, beta and gamma surface contamination
- Detector
- Pancake GM tube LND 73118 or equivalent; mica window 1.5–2.0 mg/cm² behind a fine stainless-steel wire mesh
- Count-rate range
- 0–42,000 cps
- Weight
- 370 g (0.8 lb)
8 referenced values
Bertin
SaphyRAD probes
Alpha and beta probes for the SaphyRAD contamination meter
- Active area
- 32 cm² (A 32), 31 cm² (AB 31), 100 cm² (AB 100, A-B 100), 170 cm² (AB 170, A-B 170, A-BG 170)
- Measurement range
- α: 0.01–100 Bq/cm²; β and α+β: 0.1–1,000 Bq/cm²; AB 31: 0.1–2,150 Bq/cm²
- Energy range
- α: 3–8 MeV; β: 100 keV–2.2 MeV
10 referenced values
Contact us
Questions about this product?
We help you choose the right configuration, detector and accessories for your measurement task.
Oscar ÅgerstamFounder & CEO