RAM GENE-1 Meter

Combined dose-rate and contamination meter with pancake GM for one-handed use

RAM GENE-1 Mark II is a combined dose-rate and contamination meter for one-handed use, built for extreme conditions with a ruggedised casing and backlight. A recessed pancake GM detector with a thin mica window measures contamination with the cap off and dose rate with the plastic cap on. It can now also be powered from an external input, which also charges the batteries.

Detector
1.75-inch pancake GM tube (LND73118 or equivalent); mica window 1.5–2.0 mg/cm² behind a stainless-steel mesh1
Measurement range
0.05–7,000 µSv/h1
Count-rate range
0–42,000 cps1
Datasheet

Specifications checked against the manufacturer’s documents on 2026-10-17

Manufacturer’s product page (opens in a new tab)

Overview

Key features

  • Large four-digit LCD with backlight
  • Audible and visual count-rate indication
  • Alarms for overflow, low battery and detector failure

Specifications

The number after each value refers to the source listed below. Values are as published by the manufacturer; the exact configuration is always confirmed in our quotation.

Detector

Detector1.75-inch pancake GM tube (LND73118 or equivalent); mica window 1.5–2.0 mg/cm² behind a stainless-steel mesh1

Measuring range

Measurement range0.05–7,000 µSv/h1
Count-rate range0–42,000 cps1
SensitivityApprox. 5.8 cps per µSv/h (58 cps per mR/h), ¹³⁷Cs2

Connectivity & interface

DisplayLarge four-digit LCD, continuous ranging1

Power & battery

Power supplyOne 9 V alkaline battery; external power input that also charges rechargeable batteries1

Mechanical

Dimensions11 × 6.7 × 7.4 cm1
Weight0.565 kg (1.25 lb)1

Environment & ratings

Operating temperature−10 to +50 °C1

General

FunctionsDose rate and surface contamination; switched by placing or removing the plastic cap2

The data comes from the manufacturer’s published documents. Manufacturers may change specifications; the current configuration and performance are confirmed in the quotation.

Documents

Sources

The number after each value refers to the source listed below. Values are as published by the manufacturer; the exact configuration is always confirmed in our quotation.

  1. 1
    Publisher: Rotem IndustriesDatasheet TDS, Technical Data Checked 2026-10-16
  2. 2
    Publisher: Rotem IndustriesProduct page Product page – Product Specifications; Product page – Technical Information Checked 2026-10-16
RAM DA3-2000 Meter
Rotem

RAM DA3-2000 Meter

Smart meter for a range of interchangeable external detectors, with internal GM detector

Detector
Internal detector (DA3-2000): two energy-compensated GM tubes, ZP1201 and ZP1313 (air kerma) or ZP1202 and ZP1314 (H*(10)); DA 2000 without internal detector
Measurement range
0.5 µSv/h – 1 Sv/h (50 µR/h – 100 R/h), internal detector
Weight
1.5 kg including batteries and internal detectors
14 referenced values
RAM R-200 Meter
Rotem

RAM R-200 Meter

Rugged multipurpose survey meter for wide-range gamma and contamination

Detector
Two energy-compensated GM tubes: ZP-1202 and ZP1314 (or equivalent)
Measurement range
Internal detectors: 0.1 µSv/h – 1 Sv/h (10 µR/h – 100 R/h); with external probes gamma up to 100 Sv/h and alpha/beta 0–1 Mcpm
Weight
460 g including battery
15 referenced values
SaphyRAD S
Bertin

SaphyRAD S

Dose rate & contamination

Energy range
50 keV–3 MeV
IP rating
IP65
Weight
620 g
13 referenced values
SaphyRAD MS
Bertin

SaphyRAD MS

Handheld multiprobe survey meter for contamination and dose rate

Energy range
50 keV–3 MeV
10 referenced values
Contact us

Questions about this product?

We help you choose the right configuration, detector and accessories for your measurement task.