Bild: ORTEC
Amplifier, preamplifier, bias and SCA
Standalone electronics unit for scintillation measurements combining a preamplifier, shaping amplifier, single-channel analyzer, ratemeter and high-voltage supply. Detector selected separately.
Download product sheet (PDF)All values with references – for tender documents
Specifications checked against the manufacturer’s documents on 2026-10-16
The number after each value refers to the source listed below. Values are as published by the manufacturer; the exact configuration is always confirmed in our quotation.
| Peaking time | 2 µs2 |
|---|
| Linear output range | 0–10 V; positive lobe leading2 |
|---|---|
| SCA dynamic range | 200:11 |
| High-voltage output range | 50–2000 V; selectable polarity2 |
| Gain | 5–12501 |
|---|---|
| Pulse shape | Semi-Gaussian, bipolar2 |
| Maximum high-voltage load | 1 mA at 2000 V1 |
| High-voltage ripple | <15 mV rms; 1 kV, 1 mA1 |
| Ratemeter display range | 0–99.9 kcps1 |
|---|
| Power supply | 115 or 230 V AC; internal tap for 100 or 200 V AC1 |
|---|
| SCA lower/upper level | 0.05–9.99 V1 |
|---|
The data comes from the manufacturer’s published documents. Manufacturers may change specifications; the current configuration and performance are confirmed in the quotation.
The number after each value refers to the source listed below. Values are as published by the manufacturer; the exact configuration is always confirmed in our quotation.
Low-power PMT base with preamplifier
PMT base for 14- and 12-stage, 20-pin photomultipliers
PMT base for 10-stage, 14-pin photomultipliers
PMT base for 12-stage, 21-pin photomultipliers, for fast timing
We help you choose the right configuration, detector and accessories for your measurement task.
ORTEC (AMETEK)