Bild: ORTEC
Spectroscopy amplifier
ORTEC 575A shapes and amplifies detector pulses for energy spectroscopy. Settings are matched to the detector, preamplifier and count rate.
Download product sheet (PDF)All values with references – for tender documents
Specifications checked against the manufacturer’s documents on 2026-10-16
The number after each value refers to the source listed below. Values are as published by the manufacturer; the exact configuration is always confirmed in our quotation.
| Integral nonlinearity | <±0.05 % at 1.5 µs1 |
|---|---|
| Equivalent input noise | <5 µV rms at 3 µs; <7 µV at 1.5 µs; unipolar, gain ≥1001 |
| Linear unipolar output | 0–+10 V1 |
|---|
| Gain | 5–12501 |
|---|---|
| Shaping time constants | 0.5; 1.5; 3 µs1 |
| Input polarity | Positive or negative1 |
| Channels | 11 |
| Gain temperature instability | ≤±0.0075 %/°C; 0–50 °C1 |
|---|
| Module format | Single-width NIM1 |
|---|
The data comes from the manufacturer’s published documents. Manufacturers may change specifications; the current configuration and performance are confirmed in the quotation.
The number after each value refers to the source listed below. Values are as published by the manufacturer; the exact configuration is always confirmed in our quotation.
Low-power PMT base with preamplifier
PMT base for 14- and 12-stage, 20-pin photomultipliers
PMT base for 10-stage, 14-pin photomultipliers
PMT base for 12-stage, 21-pin photomultipliers, for fast timing
We help you choose the right configuration, detector and accessories for your measurement task.
ORTEC (AMETEK)