Bild: ORTEC
Portable power supply
Compact power supply for preamplifiers and a NIM module at a remote measurement location. Optional cables are required to expand connections.
Download product sheet (PDF)All values with references – for tender documents
Specifications checked against the manufacturer’s documents on 2026-10-16
The number after each value refers to the source listed below. Values are as published by the manufacturer; the exact configuration is always confirmed in our quotation.
| Noise and ripple | <3 mV peak-to-peak, observed on a 50 MHz bandwidth oscilloscope1 |
|---|
| Outputs and maximum current per rail | ±12 V: 1 A; ±24 V: 0.5 A1 |
|---|---|
| Nominal mains voltage | 100 / 120 / 220 / 240 V AC1 |
| Mains frequency | 47–63 Hz1 |
| Preamplifier connectors | 4 × 9-pin D1 |
|---|
| Maximum total DC output power | 48 W; 0–50°C1 |
|---|
| Expansion with optional cables | Up to 16 preamplifiers with 4 × 4002P-C11 |
|---|
The data comes from the manufacturer’s published documents. Manufacturers may change specifications; the current configuration and performance are confirmed in the quotation.
The number after each value refers to the source listed below. Values are as published by the manufacturer; the exact configuration is always confirmed in our quotation.
Low-power PMT base with preamplifier
PMT base for 14- and 12-stage, 20-pin photomultipliers
PMT base for 10-stage, 14-pin photomultipliers
PMT base for 12-stage, 21-pin photomultipliers, for fast timing
We help you choose the right configuration, detector and accessories for your measurement task.
ORTEC (AMETEK)