Bild: ORTEC
NIM bin power supply
Regulated power supply for NIM bins. Rated rail currents may be combined within the specified total DC power limit.
Download product sheet (PDF)All values with references – for tender documents
Specifications checked against the manufacturer’s documents on 2026-10-16
The number after each value refers to the source listed below. Values are as published by the manufacturer; the exact configuration is always confirmed in our quotation.
| Maximum total DC output power | 160 W; 0–50°C1 |
|---|---|
| Outputs and maximum current per rail | ±6 V: 10 A; ±12 V: 3 A; ±24 V: 1.5 A1 |
| Mains frequency | 50–60 Hz1 |
| Nominal mains voltage | 115 / 220 V AC1 |
| Noise and ripple | <6 mV peak-to-peak, observed on a 20 MHz bandwidth oscilloscope1 |
| Temperature coefficient | <0.02%/°C; 0–60°C1 |
| Compatible bin | 4001A / 4001C (4001C recommended); not included with separate power supply1 |
| Overload protection | Current foldback limiting and thermal shutdown1 |
The data comes from the manufacturer’s published documents. Manufacturers may change specifications; the current configuration and performance are confirmed in the quotation.
The number after each value refers to the source listed below. Values are as published by the manufacturer; the exact configuration is always confirmed in our quotation.
Low-power PMT base with preamplifier
PMT base for 14- and 12-stage, 20-pin photomultipliers
PMT base for 10-stage, 14-pin photomultipliers
PMT base for 12-stage, 21-pin photomultipliers, for fast timing
We help you choose the right configuration, detector and accessories for your measurement task.
ORTEC (AMETEK)