CellTest 1470E

Multichannel system for battery and energy storage testing

Characterize batteries, fuel cells and supercapacitors with independent DC and impedance measurements. Each 1470E unit supports eight cells at once.

Measurement channels
8 independent potentiostats1
Compliance voltage
±10 V1

Specifications checked against the manufacturer’s documents on 2026-10-16

Manufacturer’s product page (opens in a new tab)

Overview

Key features

  • Eight floating potentiostat channels per unit.
  • Up to ±4 A per channel; channels can be connected in parallel.
  • Simultaneous EIS across multiple cells with compatible FRA modules.

Specifications

The number after each value refers to the source listed below. Values are as published by the manufacturer; the exact configuration is always confirmed in our quotation.

Measuring range

Minimum current range, standard±50 µA1
EIS frequency range1455A FRA: 10 µHz–1 MHz; 1451A FRA: 10 µHz–100 kHz (options)1

Electronics & signal

Measurement channels8 independent potentiostats1
Maximum output current±4 A per channel1
Current with parallel channelsUp to 32 A through parallel connection1
Auxiliary inputs14702A: 8 auxiliary voltage channels (option; only with 14701A or 14703A)1

Software & data

SoftwareCellTest included; MultiStat is an alternative1

Connectivity & interface

Communication interfaceEthernet or GPIB1

Environment & ratings

Compliance voltage±10 V1

General

EIS capabilitySeparate FRA modules for simultaneous EIS; external FRA can be multiplexed in GPIB mode1
Floating measurement / isolationFloating, independent per channel1

The data comes from the manufacturer’s published documents. Manufacturers may change specifications; the current configuration and performance are confirmed in the quotation.

Sources

The number after each value refers to the source listed below. Values are as published by the manufacturer; the exact configuration is always confirmed in our quotation.

  1. 1
    Publisher: AMETEK Scientific InstrumentsProduct page product page; Differentiated Specifications – CellTest 1470E column Checked 2026-10-16
SI-9300R
AMETEK SI

SI-9300R

Battery cycler / analyzer

Measurement channels per module
5 in a fully populated module
Applied voltage per channel
+300 mV to +10 V
Maximum output current
±200 A continuous; 300 A for a 60 s pulse
6 models
SI-6200 battericykler / analysator
AMETEK SI

SI-6200 battericykler / analysator

Battery cycler / analyzer

Measurement channels per module
10
Applied voltage per channel
−3 V to +10 V
Maximum output current
±200 mA per channel
11 referenced values
Contact us

Questions about this product?

We help you choose the right configuration, detector and accessories for your measurement task.